What Lock to Get
Know what you've got.
Get what you need.
The importance of secure external doors can not be ignored. Should you suspect that any of your existing cylinders are vulnerable to attack, or fall short of insurance policy requirements - consider replacing with high security cylinders.
What are High Security Cylinders
The euro cylinder is probably the most vulnerable part of a door. If a burglar can manipulate or remove the euro cylinder, then they can open the door. That's why it's important to fit a euro cylinder that can resist compromise.
Euro cylinders that are designed to resist physical attack and manipulation are commonly referred to as high security cylinders.
Typical High Security Features
Anti-Snap - deliberate weak point resists lock snapping
Anti-Bump - low and high driver pins resists lock bumping
Anti-Drill - Lock drilling resisted with anti-drill pins and plug cuts
Anti-Pick - spool pins make lock picking fruitless
Anti-Plug Pull - resists plug and cylinder pull
Visual deterrent - visible kitemark discourages thieves
We describe the individual features of high security euro cylinders in more detail within the Security Products pages.
Certification & Quality Logos
There are a number of certification marks that can be used to determine the quality of a euro cylinder. Some aspects of the certification marks are concerned with the quality of manufacturing processes, while others test and grade the cylinder based on it's resistance to attack and it's general durability.
When purchasing euro cylinder locks, be sure to look out for the following marks.
TS 007 Security Standard logo
TS007 is a security standard for replacement cylinder locks and protective door furniture. Developed by Door & Hardware Federation and Glass & Glazing Federation in response to concerns over cylinder attacks. The standard is characterised by a 3 star rating system. The 3 star rating can be achieved by use of a 3-star rated cylinder, or by combining a 1 star cylinder wth 2 star door furniture.
BSI Kitemark logo
The BSI kitemark is a product certification mark that represents quality and safety and is one of the most respected and trusted throughout the world. Manufacturers require a comprehensive quality management system and must carry out initial product testing and subsequent audit testing to achieve the kitemark classification.
A large number of insurance companies now require any euro cylinder lock fitted to an external door to have been awarded a British Standard
Kitemark and for the kitemark to be stamped on the cylinder.
European Standard EN 1303:2005
BS EN 1303:2005 logo
The EN 1303 European Standard was introduced to establish assessment and test criteria for the measuring of a cylinders resistance to physical attack, key security, fire resistance and durability. Assessed cylinders are awarded an 8 digit code that describes their performance against each assessment criteria. This code is a useful tool for comparing the strength of one cylinder against another.
EN 1303 8 Digit Code Explained
Each of the 8 digits that make up the BS EN 1303 classification shows the Grade awarded to a feature of a product when measured against the performance requirements of the standard. The following is an example code for demonstration purposes.
1 6 - 1 - C 5 2
This code tells us that the cylinder used for the example met the required Category of Use torque resistance, passed 100,000 cycles during Durability tests, offers Fire Resistance, got highest grade for Corrosion Resistance, achieved grade 5 and 2 for Key Security and Attack Resistance respectively. Note that euro cylinders do not require Door Mass and Safety to be measured.
Look at the following table, which describes the EN 1303 classication code when applied specifically to euro cylinder locks. This will help you to understand the above example and better appreciate what you are buying.
1 Category of Use - Linked to frequency of use Grade 1 - Usable after resisting 2.5Nm torque
2 Durability - Cycles achieved during testing Grade 4 - 25,000 cycles
Grade 5 - 50,000 cycles
Grade 6 - 100,000 cycles
3 Door Mass & Closing Force - Not required N/A
4 Fire Resistance - Tested to BS EN 1634-1 for use on fire/smoke doors Grade 0 - No requirement
Grade 1 - Approved
5 Safety - No requirement N/A
6 Corrosion - Corrosion tested to BS EN 1670. Temperature resistance tested within -20° to +80°C Grade 0 - No requirement.
Grade A - Corrosion approved. No temperature resistance required.
Grade B - No corrosion resistance required. Temperature resistance approved
Grade C - Corrosion and temperature resistance approved
7 Key Security - Measures key related security Grade 1 to 6 where 6 offers the greatest security
An explanation of Key Security Grades can be seen within the separate table below.
8 Attack Resistance - Performance against common techniques Grade 0, 1 or 2, where 2 offers the greatest resistance.
An explanation of Attack Resistance Grades can be seen within the separate table below.
The following tables provide us with an explanation of what the Key Security and Attack Resistance grades actually mean and how they would benefit us.
Digit 7 (Key Security) Grades Explained
Min. No. Effective Differs 100 300 15,000 30,000 30,000 100,000
Min. No. Movable Pins 2 3 5 5 6 6
Direct Coding on Key Yes Yes No No No No
Cylinder/Plug Torque Resistance (Nm) 2.5 5 15 15 15 15
Digit 8 (Attack Resistance) Grades Explained
Resistance to Drilling (net) N/A 3mins 5mins
Resistance to Chisel Attack (blows) N/A 30 40
Resistance to Twisting Attack (twists) N/A 20 30
Resistance to Plug/Cylinder Extraction N/A 15kN 15kN
Cylinder/Plug Torque Resistance N/A 20Nm 30Nm
The EN 1303 classification code is a great tool for comparing cylinders.
PAS 23/24 logo
PAS 23/24 is an enhanced security standard, which requires that the cylinder is kitemarked and passes 2 additional cylinder tests, these being lock snapping attacks using mole grips and screw.
PAS 23/24 guarantees that a tested system can withstand an attack lasting 3 minutes, which is the average amount of time a burgular will spend trying to break in.
Euro cylinders that do not include Anti-Snap features can be protected by the fitting of high security handles or cylinder rose.
Secured by Design
Secured by Design logo
The official UK Police initiative supporting the principles of 'designing out crime'. To gain approval and be able to user the Secured by Design mark, locks must be tested to either BS EN 3621:1998 or BS EN 1303:1998 standards.
Insurance Approved logo
The Insurance Approved mark is awarded to locks that are approved to BS EN 36261 and carry the Brtitish Standard Kitemark. In many cases fitting an Insurance Approved lock is a requirement and may reduce your premiums.
Insurance Approved logo
This identifies a product as having been independently tested and awarded the Sold Secure Quality Mark. Sold Secure was established by Northumbria and Essex Police in 1992 with help and backing from the Home Office. It is now owned and administered by the Master Locksmiths Association (a not for profit trade association).
Checking your Cylinders
Identifying the level of security that a cylinder offers is not always clear. Particularly from just a visual inspection as most of the identifying features may be hidden within the barrel.
The BSI Kitemark may be stamped on the ends or the side of a cylinder. These suggest that the locks meets EN1303:2005 or EN3621:2007 and has been awarded the Insurance Approved stamp. Some insurance companies have more sepcific, higher level security requirements, so don't take it for granted that a kitemarked cylinder meets your policy requirements.
Some manufacturers stamp their cylinders with identifying features like their logo, cylinder model numbers etc. Once you have this information it may be possible to source the security rating from the manufacturer, distributor, retialer or the Internet.
Check paperwork relating to the purchase and fitting of the lock for any indication to the lock manufacturer and model. Keep your eyes open for the 8 digit BS EN1303:2005 code as that will identify the performance of the cylinder against the standards criteria.
There are a few external signs to look for but you will first need to remove the cylinder. Don't worry if you don't know how to remove a euro cylinder, it is really easy and only takes a few minutes.
Number of Pins
Bungs used for blocking the holes through which springs and pins are inserted can often be seen on the underside of the cylinder. A high security lock will generally have at least 6 pins on either end. The more pins give greater number of effective differs, so the lock is more unique and harder to pick.
These pins may run alongside the standard pins. Smaller and spring loaded, they spring into action and lock the plug when bumping is attampted. Absence of these does not mean that the cylinder is not Anti-Bump as there are other Anti-Bump features that are not visible on the outside of the cylinder.
Smaller diameter than any pin bungs. These hardened steel pins may be visible on underside of cylinder.
Vertical cut lines near face of cylinder. Sacrificial weak point that leaves lock secure after lock snapping attack.
Makes it hard to grip the cylinder again once it has been snapped.
Hardened Reinforced Bar
Designed to flex, rather than snap. Runs from one side of the cylinder, through the central weak point to the other. Sometimes seen on the underside of the cylinder or below the cam space, with the fixing screw running through it.
There are two high security euro cylinders that we recommend, these are the UAP+ Zero Lift Anti-Snap Euro Cylinder and the Yale Kitemark Anti-Bump Euro Cylinder.
We recommend these cylinders as they both offer a great level of protection at an incredibly low price. Both offer Anti-Bump, Anti-Pick, Anti-Drill, Anti-Extraction and Screw Attack features. However, the UAP+ euro cylinder offers Anti-Snap protection out of the box, whereas the Yale Kitemarked Anti-Bump cylinder would require a high security door handle or rose to protect against lock snapping.